MBM SPRINT 3000 Manual de Instruções

Provided By http://www.MyBinding.com http://www.MyBindingBlog.com MBM Sprint 3000 Booklet MakerInstruction Manual

oper3500.doc Page 8 23/01/2004 4.4 Paper Width Settings: 1. Both side guides should be adjusted for a given s

oper3500.doc Page 9 23/01/2004 4.5 Stapling / Folding Positions : 1. The Stapling and the Folding positions a

oper3500.doc Page 10 23/01/2004 4. If fold line is not perpendicular to booklet edges, this can be corrected b

oper3500.doc Page 11 23/01/2004 4.6 Changing stapling head positions. 1. To move the stapling heads to the al

oper3500.doc Page 12 23/01/2004 4. Four positions are provided for the various sized books between 4¼“ x 5½“ a

oper3500.doc Page 13 23/01/2004 4. When paper is placed in the machine it breaks the light beam between the ph

oper3500.doc Page 14 23/01/2004 6. CORNER AND EDGE STAPLING The two paper stops are to aid edge stapling along

oper3500.doc Page 15 23/01/2004 7. COUNTER The counter can be reset to '0000' by pressing the recta

oper3500.doc Page 16 23/01/2004 10. PROBLEM SOLVING. PROBLEM POSSIBLE CAUSES REMEDY Motor will not start

SPRINT 3000BOOKLETMAKEROPERATION MANUALIMP

oper3500.doc Page 1 23/01/2004 CONTENTS 1. Introduction. 2 2. Specification.

oper3500.doc Page 2 23/01/2004 Fax: (803) 552 2974 Parts & Service - Tel: (800) 223 2508 Fax: (803) 760 3814

oper3500.doc Page 3 23/01/2004 Fuse: 10 amp 115v. 3. INITIAL SETTING UP 1. Remove the bolts

oper3500.doc Page 4 23/01/2004 8. Check that the power supply is of the correct voltage for the machine. Once

oper3500.doc Page 5 23/01/2004 4. OPERATION Figure 1 - Control layout (centre head removed for clarity)

oper3500.doc Page 6 23/01/2004 4.1 Loading Staples : 1. Only those staples sold or recommended by your supp

oper3500.doc Page 7 23/01/2004 4. When the staple out system is in use, the staple count reset button should be