MBM 306A Manual de Serviço

F-45N / F-43N (306A) Service Manual

10 8.Essential Wiring Diagram

11 9. Paper Feed Table Section As the paper feed table is raised, paper feed pressure is given to the paper feed roller. Paper guides slide symmetrica

12 11. Paper Fold Section (1) Structure The stopper slider which movers horizontally and the stopper plate is installed at the stopper screw set in th

13 12.Attachment and Adjustment of Slant Adjuster Knob (1) Attachment [1] Drive the paper feed slant adjuster into the M4 screw section of the paper

14 13.Replacement of Paper Feed Roller and Separator Removal of the paper separator Hook your fingernail at the back edge of the paper separator to

15 14. When the control substrate is replaced When the control substrate is replaced, the machine type data and the offset data will be changed. So

16 15. Position Input Mode Store the position of the interceptor (Position input mode): (1) Lightly turn the fine adjustment knob until it is locked.

17 17. Test Mode (1) Press the Test key. (2) Turn the power on. (3) Test Mode is set. (4) Press any specific operational key. Refer to the followi

18 18. Trouble Guide Trouble Possible Cause Measures The cord is unplugged. Put the cord firmly into the outlet. The breaker is applied. Press the B

19 Trouble Possible Cause Measures The paper is coiled around the roller. Remove the table and get rid of the paper around the roller. Stains on the r

2 Contents 1.Machine Type ･･･････････････････････････････････････････････････ 3 2.Parts Names ････････････････････････････････････････････････････

3 １．Machine Type F-45N (PF20): Standard type F-43N (PF21): The popular type machine from which functions as paper feed table lifting motor, paper

4 2.Parts Names Number Name Number Name ① Roller cover ⑪ Paper feed table ② Left side cover ⑫ Table 2 ③ Paper feed roller ⑬ Right side cover ④ Pap

5 3.Designation and Functions of Operation Panel F-45N F-43N No. Designation/Indication Function ① Fold type key Six folding types can be input a

6 4.Cautions for Maintenance (1) Be sure to turn off the power source switch before performing maintenance work. Start maintenance work after pulling

7 5. Operating Conditions User Mode Option Mode Test Mode Service Mode Type Selection Mode Position Input Mode

8 6.Explanation of How to Operate the Machine (1) Turn on the power source switch. [1] ROM version is indicated first, then the model code number, des

9 7. General Arrangement Plan